弹性柱销齿式联轴器缺点
荣基工业科技(江苏)有限公司「www.rokeecnc.com」弹性柱销齿式联轴器缺点，弹性柱销齿式联轴器厂家，弹性柱销齿式联轴器生产厂家，弹性柱销齿式联轴器加工厂家，弹性柱销齿式联轴器制造厂家，弹性柱销齿式联轴器供应商。
弹性柱销齿式联轴器规格型号：GICL鼓形齿式联轴器，GICLZ鼓形齿式联轴器，GIICL鼓形齿式联轴器，GIICLZ鼓形齿式联轴器，GCLD鼓形齿式联轴器，NGCL型带制动轮鼓形齿式联轴器，NGCLZ型带制动轮鼓形齿式联轴器，WG鼓形齿式联轴器，WGZ型带制动轮鼓形齿式联轴器，WGP型带制动盘鼓形齿式联轴器，WGT型接中间套鼓形齿式联轴器，WGC型垂直安装鼓形齿式联轴器，WGJ型接中间轴鼓形齿式联轴器，同时提供非标弹性柱销齿式联轴器定制加工服务。
鼓形齿式联轴器属于刚挠性联轴器，具有径向、轴向和角向等轴线偏差补偿能力，与CL型直齿式联轴器相比，具有结构紧凑、回转半径小、承载能力大、传动效率高、噪声低及维修周期长等优点。鼓型齿式联轴器特别适用于低速重载工况，如冶金、矿山、起重运输等行业、也适用于石油、化工、通用机械等各类机械的轴系传动。
The curved-tooth gear coupling is a specially designed advanced gear coupling. Its outer teeth are made into a sphere, with the center of the sphere on the axis of the gear. The teeth clearance is slightly larger than the general products and can transfer a greater torque and allow greater angular displacement, enjoying excellent performance and longer life.
ROD齿式联轴器采用大压力角齿形设计，轴孔采用短轴设计，缩小了长径比，结构更加紧凑，转速性能优异。相近型号的螺栓采用标准统一化，零部件通用性好。与国家标准联轴器相比能够传递更大的扭矩，质量相对大幅度减轻，转动惯量小，符合欧洲防爆要求，各种综合性能大大超前。为了更好的传动性能，我们强烈推荐您选用。
ROD toothed coupling is one of the transmission products with core technology independently developed by Rokee and has established and reported corporate technical standards in the country. By combining with the standard coupling technology of advanced countries such as Japan and Germany, we optimized many detailed dimensions, and adopted the toothed design with a large pressure angle and short shaft design for the shaft hole, which reduces the length-diameter ratio, and has a more compact structure and excellent speed performance. The bolts of similar types are standardized and the parts are universal. Compared with the national standard couplings, our standard couplings can transfer more torque, with greatly reduced mass and small moment of inertia. Brake drum gear coupling meets the European explosion-proof requirements and the comprehensive performance is greatly advanced. We highly recommend you to choose our products for better transmission performance.
弹性柱销齿式联轴器规格型号：LZ(ZL)型弹性柱销齿式联轴器，LZD(ZLD)型圆锥形轴孔弹性柱销齿式联轴器，LZZ(ZLL)型带制动轮弹性柱销齿式联轴器，LX(HL)型弹性柱销联轴器，LXZ(HLL)型带制动轮弹性柱销联轴器，LT(TL)型弹性套柱销联轴器，LTZ(TLL)型带制动轮弹性套柱销联轴器，同时提供非标弹性柱销齿式联轴器定制加工服务。
弹性柱销齿式联轴器采用非金属弹性柱销和两个带齿形半联以及一个外圈的齿形套环设计，利用非金属弹性的变形来传递扭矩同时缓冲减震，补偿角向位移。
The crown pin coupling is designed with non-metallic flexible pin, two toothed semi-couplings and a toothed sleeve ring with an outer ring. It uses non-metallic flexible deformation to transfer torque and cushion shock and compensate angular displacement.
弹性柱销联轴器是一种结构简单制造容易，无需润滑，装拆弹性柱销便捷的传动基础件，利用两个带法兰孔的半联和置于起重的非金属弹性柱销来传递扭矩，适用于中低速和中低扭矩场合。
The flexible pin coupling is a basic transmission parts that has simple structure, needs no lubrication, and is easy to manufacture, install and disassemble the flexible pin. Elastic pin coupling uses two semi-couplings with flange holes and a non-metallic flexible pin for crane to transmit torque, suitable for low-to-medium speed and low-to-medium torque occasions.
弹性套柱销联轴器设计简单巧妙，适用性较广的联轴器，利用带弹性套的柱销联接两个带销孔的半联，实现扭矩传递的同时兼具较大的角向补偿，同时减震缓冲性能良好，可以用在速度较快的场合，无需润滑，销套更换便捷。
The design of the elastic sleeve pin coupling is simple and clever in design and has wide applicability. Pin bush coupling uses the pin with elastic sleeve to connect two semi-couplings with pin holes to realize torque transmission and larger angular compensation. At the same time, flexible bush coupling has good shock absorption and buffering performance, which can be used in high-speed occasions without lubrication and requiring easy pin sleeve replacement.
《弹性柱销齿式联轴器缺点》由Rokee发布于2024年7月26日