荣基工业科技(江苏)有限公司「www.rokeecnc.com」卷筒联轴器加工工艺,卷筒联轴器厂家,卷筒联轴器生产厂家,卷筒联轴器加工厂家,卷筒联轴器制造厂家,卷筒联轴器供应商。
卷筒联轴器规格型号:WZL型卷筒联轴器,DC型鼓型齿式卷筒联轴器,WJ型球面滚子卷筒联轴器,WJA型球面滚子卷筒联轴器,RWC球鼓齿式卷筒联轴器,同时提供非标卷筒联轴器定制加工服务。
卷筒联轴器是一种新型挠性联轴器,主要用于起重设备中起升机构的减速器输出轴与钢丝绳卷筒的联接,也适用于其它类似的既传递转矩又承受径向载荷的机械设备,但不能用作需承受轴向载荷的传动。卷筒联轴器是起重设备传动系统中重要的的部件, 通过其连接减速机动力输入轴和卷筒契合,传递扭矩同时限制卷筒的轴向窜动,并且带有机械或者电子磨损报警,是卷筒式提升机构的核心部件之一。
The drum coupling is an important part in the transmission system of crane equipment. It connects the power input shaft of the reducer with the drum, transmits torque and restricts the axial movement of the drum at the same time. Barrel coupling also has mechanical or electronic wear alarm, and is one of the core parts of the drum crane mechanism.
RWC球鼓齿式卷筒联轴器是Rokee开发的一种结构更加可靠,补偿能力和安全系数更高的卷筒联轴器,外轴套采用球面鼓形齿设计,对轴系安装精度要求低,传动扭矩大,过载能力强,能够承受很大的径向载荷。联接尺寸与DC系列更好相同,但承载能力提高30%以上。创新的球面密封技术使得此种型号产品润滑保持优异,寿命也极大提高。
The ball and drum gear drum coupling is a drum coupling developed by Rokee with a more reliable structure, higher compensation ability and higher safety factor. The outer sleeve adopts a spherical drum tooth design, which has low requirements for shafting installation accuracy, large transmission torque, strong overload capacity and can withstand great radial load. The connection size is the same as that of DC series, but the bearing capacity is increased by more than 30%. The innovative spherical sealing technology makes this type of product maintain excellent lubrication and greatly improve its service life.
《卷筒联轴器加工工艺》由Rokee发布于2024年7月26日